jocker hueforge

3D Print Instructions

---------------------

Layer height: 0.050 mm

First layer height: 0.100 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #000000

Color swap plan:

1. Start with #000000

2. Swap to #800000 at layer 2 (~0.150 mm)

3. Swap to #cf3840 at layer 4 (~0.250 mm)

4. Swap to #40403f at layer 6 (~0.350 mm)

5. Swap to #bfbfbf at layer 7 (~0.400 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad