Project: mazinger.hfp
Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 130.61x160mm.
You can use a higher layer height for printing at a minimum depth of less than 0.48mm
The maximum depth is 2.5mm, and the actual depth is 2.3mm.

Consumables used:
PLA PolyLite Black, Transmission Distance: 0.3
PLA PolyTerra military blue. Transmission distance: 0.3
PLA BambuLab Basic Red, Transmission Distance: 5
PLA BambuLab Basic Grey, Transmission Distance: 2
PLA BambuLab Matte Light Purple, Transmission Distance: 2
PLA BambuLab Basic Jade White, Transmission Distance: 5
PLA BambuLab Basic Yellow, Transmission Distance: 6
This printer uses 7 unique consumables

Replacement instructions:
Start with black
Switch to navy blue at the 7th layer
Switch to red at the 9th layer
Switch to gray at the 21st layer
Switch to light purple at the 23rd layer
Switch to jade white at the 26th layer
Switch to yellow at the 27th layer