Split Grommet
william_laurent
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2023-06-09 13:02:18
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Basic Print. I used supports for at least the lip on the top. This is when you have a hole and someone puts wires through without a grommet. By Scaling X and Y it will fit any. This is a tight fit on a 22mm hole. Designed with onShape.
Modellquelle
Original-Link: Details anzeigen
CC BY