Introducing the Baldercase series

This is the first of the cases in the Baldercase series. Baldercases are ITX Cases for different purpouses.

Specs

Dimensions: 250x190x100mm
Filament to print in: Any filament that is good against heat (PETG, Carbon fiber etc.)
Motherboard Support: Mini-ITX
Front-IO: 2x USB-A 3.0
Drive bays: None
Fan support: None
CPU Cooler Height: Not tested, under 70mm recommended
GPU Compatibility: None
Power supply type: FlexATX

Components

3D Files

• Body
• Side Panel
• Button
• Switch Holder

Screws

• 4x Motherboard Screws (Included with Motherboard)
• 4x Motherboard Standoffs (Included with Motherboard)
• 4x PSU Screws (Included with PSU)
• 2x M3 Screws for Side Panel: Aliexpress | Amazon.de | Amazon.com | Amazon.co.uk
• 2x M3 Screws for switch holder: Aliexpress | Amazon.de | Amazon.com | Amazon.co.uk

Electronic Components

1x Mechanical Keyboard Switch: Aliexpress | Europe | U.S. | UK
1x USB-3 Cable to motherboard header: Aliexpress

Assembly

1. Put the keyboard switch inside the hole on the switch holder
2. Put the Switch holder inside the case, and screw it in with 2x M3 screws.
3. Put the button on the switch
4. Put the side panel on the case and slide it
5. Screw the side panel on with 2x M3 screws