Camera casing and mount for mounting a Raspberry Pi camera to a 3D printer. I use Octoprint on a Raspberry Pi with a Pi camera to monitor 3D prints. I use this camera mount, attached to the printer with a self-adhesive 3M velcro pad.

Bill of Materials:

3D printed parts
Qty 1 - CamCase1
Qty 1 - CamCase2
Qty 1 - CamPostExt2
Qty 1 - CamMtPltExt
Qty 1 - C_Clip_8mm
Qty 3 - C_Clip_4.5mm

Hardware/Commercial items:
Qty 1 - SHCS, M3 x 14mm Long
Qty 2 - M3 flat washer
Qty 1 - M3 hex nut
Qty 1 - 3m velcro pad

Updated 14 May 23:
Added 2 alternate length camera posts (use in place of CamPostExt2) and 1 alternate length mounting plate (use in place of CamMtPltExt).

Creality

CR-6 SE

No

Yes

Standard

20%

CamPostExt gets printed vertically; recommend using brim/raft.