Project: queen.hfp

Print with a 100% infill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The size of the model is 118.75x211.11mm

You can use a higher floor height, but it cannot be less than 0.24mm

The maximum depth is 2mm, and the actual depth is also 2mm.

Consumables used:

PLA Sunlu Black, transmission distance: 0.3

PLA Sunlu Purple, transmission distance: 4.5

PLA BambuLab Basic Yellow. Transmission distance: 6

Bamboo white, transmission distance: 6

This printer uses four unique consumables

!!!! It seems that you have mixed different types of consumables. Please make sure your intention is correct. !!!!!

Switching command:

Starting with black

Switch to purple on the 6th layer

Switch to yellow on the 12th layer

Switch to white for the remaining part on the 16th layer