This is a disk tray or disk caddy that fits into a Dell R230 with fixed 3.5" drive bays. It allows for 2 2.5" drives to be installed. The top mounting locations supports a 7mm SSD/HDD or disk while the bottom slot supports up to 15mm thick SSD/HDD. I modified the internal wiring of a Dell R230 with 2 fixed 3.5" bays to support 4 drives. This is where this became necessary.

This print requires supports. Settings:

• Material: PETG
• Supports: Yes
  • Support placement: Touching build plate
  • Support overhang angle: 80
• Build plate adhesion: Optional