Modified version of Mini Satana
BriskYak98
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2024-12-26 16:44:08
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Dieser Inhalt wurde automatisch übersetzt. Original anzeigen
Abstract
This is a mini Saturna modification that is compatible with the original CR Touch mounting bracket and the Creality direct drive kit. As shown in the above picture, it is recommended that you remove the two screws of the hot end fan and use them to install the modified version in place.
Please also check out my other models.
Print settings
Printing brand:
Creality
Raft layer:
I don't care
Resolution:
0.2 or 0.3
Consumables:Overture PLA
White note: It may be a bit difficult to install the CR Touch using the two screws of the hot end fan, but it is possible. You can also use this fan cover without the CR Touch or direct drive.
Modellquelle
Original-Link: Details anzeigen
CC0