Printer: Ender 3 Pro with BLTouch

Slicer: Cura

Layer Height: 0.2mm
Line Width: 0.4mm

Infill: 25%
Infillmultiplier: x5
Infillpattern: Cubic Subdivision

Hotend Temp: 225°C
Bed Temp: 50°C

Support: Yes

Designed for a pipe with a diameter of 19mm. All neccessary parameters are changebale in the parameter section in fusion.

Additionally i used following parts:

• two threaded inserts M3 (Dimensions: 4.6x5.7mm)
• two M3x10mm bolts
• one threaded insert M5 (Dimensions: 7.1x9.5mm)
• one M5x60mm bolt