This is the enclosure for the electronics of a modified IKEA Spöka night light. Once completed the night light can be remote controlled from Internet.

Details about how this actually works are available on our web site:
https://www.yoctopuce.com/EN/article/creating-a-connected-night-light

MakerBot

MakerBot Replicator 2X

No

No

Standard

Printed in ABS

Part to print:

• 1 x main_part.STL
• 1 x bottom.STL
• 2 x top.STL

We have print all these part in ABS wihout raft and support

Part to buy:

• 8 x 3mm flat head screws
• 1 x Yocto-Color-V2
• 1 x Yocto-Wireless-SR
• 1 x Board2Board-127
• 1 x Fix-2.5mm
• 1 x One Spöka night light from IKEA
• 1 x NeoPixel 12 led ring from Adafuit (optional)
• a short lenght of electric cable

Steps:

1. Detach the leds of the Yocto-Color-V2 using a cutting pliers
2. Rewire them leds on the Yocto-Color-V2 with the electric cables or use the NeoPIXEL ring for more punch.
3. Fix and solder the Yocto-Color-V2 and the Yocto-Wireless-SR using the Board2Board-127 and the Fix-2.5mm
4. Screw the two top print on the main_part using 4 x 3mm flat head screws
5. Insert all the electronics into the main_part
6. Screw the bottom using 4 x 3mm flat head screws
7. Fix the "head" of a Spöka night light on top of the enclosure.