蛇形SH
evelyn_david
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
1
1
0
Veröffentlicht:2025-12-29 02:36:42
2
0
110Beschreibung
Tags
Modellquelle
Rezensionen(0)
found on Cults by Virtubob. Two files, the SH version is the Strong Hold, the one he recommends printing and not to use a stringy filament... so pretty much no PETG “technically”!
His settings are resolution 0.2mm
infill 15%
no support and no raft
—-
— the green one is the one I printed.
My settings: 0.2/0.4mm quality
Three walls so 1.2mm for broom/top and walls
Since I used PETG (Sunlu Matte High Speed), I put it on a blue paint tape with glue
Speed: first three rows at 20mm/s, the 65 and 32.5mm/s for the rest
Fan: 0% for first three row then 50% settings
Took 7hrs and looks and works amazingly well! 🤗
Tags
Modellquelle
Original-Link: Details anzeigen
CC BY-SA