Ravioli mold that allows you to place one noodle on top of the floured mold, fill with the filling, then place the second noodle on top of the filling and press with a rolling pin to separate the raviolis. For best results, brush the top of the first noodle with water to enhance sticking. Optionally, when the mold is printed, you can season the top with a thin layer of flaxseed oil and allow to cure for several weeks.

To make the mold, print both halves of the mold, then epoxy together, using the pins to line up the halves. Then epoxy the supports underneath to strengthen the bond, and epoxy the corner supports to the corners. Optionally, you can buy rubber feet to glue to the supports.