These are all the things I 3d printed/laser cut for my Jarvis server seen at the youtube link below. You do need some VHB tape to mount the hard drive mount to your case. Be sure to print the hard drive holder out of TPU for vibration isolation! Supports are only needed for the little holes that the mount slips into everything else can bridge! Be sure to print hard drive enclosure on its back.

our website! https://www.snrtechbytes.com

youtube https://youtube.com/c/snrtechbytes (in case I forget to update to the correct link)

Print Settings

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: PolyMaker PLA

Category: Computer