Utilizing WebMaka's Cagemaker PRCG, I designed this 10" Rack Mount for a Raspberry Pi Computer Module 5 IO Case (170mm x 28mm x 94mm). The OpenSCAD used in this project is based on Version 0.4 of the Cagemaker PRCG.

I've included the OpenSCAD (rpicm5_io_case.scad), the STL generated from the OpenSCAD (rpicm5_io_case.stl), and a split of the faceplate and the cage into separate STL files for smaller printers (rpicm5_io_case_front.stl and rpicm5_io_case_cage.stl, respectively).

Print Settings

• Brim: Enabled (For Cage Only)
• Supports: Support on build plate only (For Cage Only)
• Infill: 15%