A case that fits the inky wHAT e-Ink display and a raspberry pi zero. The Inky wHAT uses the standoffs that came with it to slide into the holes in the baseplate. There are also holes for two small push buttons and one toggle switch. The switch i used is a rocker toggle switch from aliexpress. The buttons are 6x6x11mm push button switches. The pi secures to the baseplate with the m2.5 screws that came with the display

Other hardware used:

• 4 M3 screws
• 4 heat set inserts
• male to female dupont wires from the display the the pi