Aa a poster for our Wacken group I created this hueforge from their promotion material.


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x151.23mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA Transmission Distance: 0.3

PLA Red Transmission Distance: 6

PLA Orange Transmission Distance: 7

PLA Yellow Transmission Distance: 6

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Red

At layer #16 (1.36mm) swap to Orange

At layer #21 (1.76mm) swap to Yellow for the rest.