Test print for parameter optimization of Colorfabb LW PLA. I didn't find a good method to optimize the flow rate for the Bamboo printer. I created multiple configuration files with different flow rates to optimize the settings of my P1S.

I can't upload the .3mf file containing the custom consumables configuration file, so I can only introduce this method to you.

1. Please click on the "Bambu Labs Profile" link below. These are the profiles customized by ColorFabb for the Bambu printer.
2. Find and download "ColorFabb LW-PLA.3mf".
3. Create about 9 different parameters with different flow rates and temperatures. You can also adjust the retraction settings, but I recommend doing additional printing to fine-tune them.
4. I applied the customized configuration file to 9 different cubes. I used a temperature of 230 - 250°C, and the flow rate varied between 0.35 and 0.55.
5. On my printer, the best results are achieved with a temperature of 240°C and a flow rate of 0.5, but there are still issues with stringing. I still need to fine-tune the retraction settings.

The photos are from Varioshore TPU. I didn't find any photos of LW PLA.

Bambu Labs has a consumable called PLA Aero. This method should be very similar to fine-tuning materials.

Bambu Labs configuration file

https://www.printables.com/model/438171-bambu-lab-profiles-x1c-x1e-and-p1s/files

Print the hollow square test

https://www.thingiverse.com/thing:271736/files

LW PLA settings

https://forum.bambulab.com/t/settings-for-the-lw-pla-on-x1c/7849/13