Mount for the heusinkveld handbrake on 40mm aluminium profile using M8 screws.

Hardware

• 2xM8 screws for profile
• 2xM8 T-nuts for profile
• 4x M6x20 screws
• 4x M6 nuts
• (4/8x 6mm washers)

*Sorry for image orientation, I don't know what my phone is doing...

Print instructions

Printed in 0.2mm PLA with 100% infill. Lower infill may also work, but the difference in print-time was not that big so I went with 100 for max strength.