Simple hearts with customizable text, perfect for gifts, decorations or table accents.

This model is part of my Heart Collection.

You may sell physical heart prints. (Digital files redistribution is not allowed.)

How to customize

Global Parameters

• heart_size
  Overall size of the heart (width/diameter in mm).

• heart_height
  Total height (thickness in mm) of the heart.

• chamfer
  Chamfer size (in mm) applied to heart edges.
  ➡ Larger values give more pronounced beveled edges.

• chamfer_scale
  Chamfer scaling factor.
  ➡ Fine-tunes how soft or sharp the chamfer looks.

Text Parameters

• top_text_string
  Text displayed on the top face of the heart.

• bottom_text_string
  Text displayed on the bottom face of the heart.

• text_font
  Font used for the text engraving.
  ➡ You can change this to any font installed on your system.

• font_size
  Size of the text.
  ➡ Increase if the text looks too small, decrease for more spacing.

• text_depth
  Depth (in mm) of engraved text.
  ➡ Higher values = deeper engraving.

• text_position
  Controls where the text appears.
  Available options:

  • "top" – only top text

  • "bottom" – only bottom text

  • "both" – top and bottom text

Export Mode

export_mode
Select what to export:

• "body" – heart without text (base model)

• "text" – text only (for multi-color or manual combining)

• leave empty if you don't want any text

For multicolor printing export both, body & text, and then load as a single object.