flowerpot
raster26forge
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2025-04-12 11:18:44
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Dieser Inhalt wurde automatisch übersetzt. Original anzeigen
You can describe in detail the design concept of the model, the printing settings, the assembly instructions, etc., so that others can understand, print, and use it.
Design concept
When designing this model, I focused on the rationality of the structure and the perfect combination of functions. I not only pursued a beautiful appearance, but also paid attention to the optimization of the internal structure, ensuring that the model not only meets practicality, but also has sufficient strength and durability.
Print settings
Printing model: K1, printing duration: 3h, layer height: 0.10mm, infill density: 20%, printing material: PLA. Support instructions: Add support to the panel notch, with a support density of 10% and a support overhang angle of 60° (support is easy to remove). The shell does not require support.
Platform attachment: It is recommended to use the Brim hat brim for attachment
The assembly instructions require that the panels, drawers, and handles be fixed with screws. The specifications of the screws are: hole spacing: 2.5mm, length: 2cm. After assembly, the components can be directly placed into the casing through the slots to complete the assembly (it is recommended to provide installation diagrams).
Modellquelle
Original-Link: Details anzeigen
CC BY