Summary

Replace the fan of the EIBOS filament dryer with a 5015 blower fan.
It is necessary to raise the height of the main body for installation. (You can raise it with EIBOS5015AdapterParts.stl)

• Original screws cannot be used. Four M3 or M4 screws of 25 mm or larger and two screws for the 5015 blower fan are required separately.
  ※The voltage at the FAN terminal on the board is 5V. In my case, I want it to run quietly, so I use a 12V blower fan.
  ※Please take responsibility for your actions.