Abstract:

I really like the basket-style filter screen for the washing tank from LoboCNC.https://www.printables.com/model/132291-sink-basket-strainer) However, my sink is not of standard size

Slicing instructions:

There are two models available. The .stl file is just the model without any additional additions, while the .3mf file includes my slicing modifications. I added a Bambulab modifier cylinder with the same dimensions as the internal shape

If you adjust the model size, please remember that you also need to change this setting.

Note:

• I recommend using PETG instead of PLA to ensure that hot water won't deform it. However, if you don't place anything hot on it, any material can be used. PETG is great because it can be put in the dishwasher. :)
• It needs support, but it's easy to remove and you don't need much of it. You can use a tree-like support. It should look like this.

• 

• I also suggest not using a fill rate of more than 40%, because although small triangles look cool, they will quickly get clogged, and the foam will be hard to pass through. Any two-dimensional fill effect will work well.