Pyramidal Kite

For this project you will need:

4x Kite Segment

1x Kite Handle

50-100m Fishing Line (0.4 or more)

Print Kite Segments with Hilbert Curve on the bottom (because it's more flexible and mb you have a bad table level)

Very carefully remove the elements from the table and then connect them into a segment as shown in the photo

Then connect the segments in a pyramid as shown in the photo

Tie the fishing line as shown in the photo (to the top segment of pyramid)

Tie and wind the fishing line on the handle as in the photo

You need good wind for stable flight!

You need a second person to fly the kite. Unwind 20-30 meters of line and gently pull it while the other person holds the kite. On command, the other person releases the kite and you start running until the kite gains altitude. Slowly unwind and pull the line until the kite gains height.

Good luck!