Snapmaker Wire Clip
scott_gallagher409
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
1
0
Veröffentlicht:2026-06-02 14:33:18
0
0
010Beschreibung
Modellquelle
Rezensionen(0)
This should be printed on it side. I used ABS with 100% infill at 0.1 resolution for my print. The screw hole is 4.25mm in order to accept a 4mm screw. The clip can accept a wire that's up to 9mm thick.
Print Settings
Printer:
Snapmaker
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100 %
Category: 3D Printer PartsModellquelle
Original-Link: Details anzeigen
CC-BY