This model allows you to mount the ali style heater to the right side of the CC2.  The wire race runs the wires along the side and up to an existing hole in the back. This fully a "no mod" arrangement that does not require any drilling (other than to the base flange of the heater for the magnets).  You simply need to buy 8 of the magnet "thumb tacks" from Amazon or Ebay. They are cheap and common and very strong!  

The heater base holds two KSD301 thermal switches. I use a 100C as over heat protection, and the other I swap out based on chamber temp desired.  

I printed this with ASA. The supports in the channel are not a lot of fun to remove, but everything else worked well. 

I've updated this with an improved thermal base and thumb tack holders. This works well overall now in my application and allows just enough space for a voxelpla bento box alongside. 

Feel free to remix/update as you see fit!

Other parts:
thermal switches:
https://www.ebay.com/itm/263658318354?var=562768999168

"thumb tacks"
https://ebay.us/m/Lz44mK

Ali Heater:
https://www.aliexpress.us/item/3256809759931465.html?spm=a2g0o.order_list.order_list_main.9.5fef1802uTY0Gi&gatewayAdapt=glo2usa