I design is 3D printed action figure that I called model bot m6. I did this
project because I want to change up the body look a bit cosmetically once
again like I did with the last model bot 3D printed action figure that I
uploaded and this one to come with two different accessories this model
comes with 2 lower arm Shields that you seen in the photos where to put
them on the left and right lower arms of this 3D printed action figure as
you see here in the photos. And the other accessory is a sniper rifle that
I got from someone else that I modified for this purpose. If you wish to
download these files depending upon your 3D printer and your experience
with one set your 3D printer accordingly after you're done with that you
will need a Dremel power tool or something similar to it. some sandpaper
to remove some of the rough edges as result of a 3D printing process.
And some super glue repair the socket joints or to fill in the gaps if
necessary with the socket joints if the event you remove too much material.
I must warn you must be very careful when putting the ball and socket joints
together use the Dremel power tool to remove any excess material from the
socket joint if necessary so you will have an easier time joining the ball
and socket joints together, and also an additional cad file will shows this
3D printed action figure assembled that cad file should show you where
everything should go. So enjoy.