The Magnet Placer (Parametric) model by erick.siders is excellent but I made some tweaks and was asked to upload a remix so here it is. My changes include:

1) Increased the clearance to 0.2mm and updated the top/bottom cap to tube distance and the top cap plunger hole to use it (was previously hardcoded to 0.1mm, I might have done the same in a few other spots as well)

2) Added threads and a taper to the plunger screw hole to help with elephants foot and ease screw installation (might be too much)

3) Converted all the bodies to components and used joints to align them (the previous static moves would not update with parameter changes, not sure if anything can be done for the top thread rotation)

4) Added extrusions to the top/bottom caps and plunger to give you something to grip when assembling/disassembling 

See the original model for more details and assembly instructions.

Get your Prusameters… Post your Makes!

If you like this project, please don't forget to  ❤ Like  and  ★ Rate! 

* Some of the links above are Amazon Affiliate links