Tripod Adapter
pixel.gizmo
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-01-16 15:38:02
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Made to hold a Rode VideoMicro. I used support and printed on PLA. Support was a bit hard to remove but still works.
Printed on Makerbot Sketch using Jessie PLA
Temp was 235c and 60c
Layer height was 0.15
Infill 15%
Breakaway
40min print time
2.5g Needed
Tags
Modellquelle
Original-Link: Details anzeigen
CC-BY