Project: sailor1.hfp
Print with a layer height of 0.08 mm and a base layer height of 0.16 mm, with a fill rate of 100%

The model's dimensions are 95.63x170mm.
You can use a higher layer height to print at a minimum depth of 0.48mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

The wires used are:
PLA PolyLite, black, transparency: 0.3
PLA PolyTerra military blue, transparency: 0.3
Bambu Lab PLA Basic, bamboo green, transparency: 4
Bambulab PLA Basic, Blue, Transparency: 2
Bambu Lab PLA Matte Cherry Blossom Pink. Light transmittance: 3
Bambu Lab PLA Matte, light purple. Light transmittance: 2
Bambu Lab PLA Basic, beige color, transparency: 8
Bambu Lab PLA Basic, jade white, with a transparency rating of 5
This print uses eight unique filament types.

Material replacement instructions:
Start with black
Replace the sixth layer (0.56mm) with military blue
Replace the 10th layer (0.88mm) with bamboo green
Replace the 12th layer (1.04mm) with blue
Replace the 14th layer (1.2mm) with cherry blossom pink
Replace the 19th layer (1.6mm) with light purple
Replace the color of the 22nd layer (1.84mm) with beige
Replace the filament on the 25th layer (2.08mm) with jade white until the printing is completed.