These files are included in the storage device that comes with the Sonic Pad. If you have deleted them or want to print a bracket that matches your printer before receiving it, you can use these files.

Editor: I've added more files provided by the Creality website, which are suitable for several of their printers. Additionally, there are two versions available, depending on whether you have a flat cable or a round cable

Explanation

Flat printing, no support needed.
Print it with a layer thickness of 0.2mm.

Regarding calibration

• I suggest you set up your printer
• Place the printed bracket on the printer and install the sensor
  • Using the screws/bolts that come with the Sonic Pad and the screws/bolts you removed, you should be able to find two pairs of screws/bolts that meet your length requirements.
• On Sonic Pad
  1. Configuration
  2. Other settings
  3. Advanced options
  4. Measuring resonance
  5. Execute on the X axis
  6. Then, execute it on the Y axis. Here, you can check another printout that you might want to use:
     https://www.printables.com/fr/model/332077-creality-sonic-pad-sensor-bracket-y-axis 

After completing the process, you can remove the component and store it somewhere. You might need it later, for example, if you change some of the printer's settings or its location.

Acknowledgments

These models are provided by Creality