Project: albedo.hfp
Print with 100% infill, 0.08mm layer height, and 0.16mm base layer

The model's dimensions are 94.13x210mm.
You can use a higher layer height for printing at a minimum depth of 0.48 mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
PLA Bambulab Basic
PLA BambuLab Matte
PLA BambuLab Matte
PLA BambuLab Matte
PLA BambuLab Basic
PLA BambuLab Basic
PLA BambuLab Basic
This printing process used 7 different consumables

Material replacement instructions:
Starting with black
Change it to sea blue on the 8th layer (0.72mm)
Change it to Latte Brown on the 12th layer (1.04mm)
Change it to cherry blossom pink on the 17th layer (1.44mm)
Change it to pink on the 19th layer (1.6mm)
Change it to beige on the 22nd layer (1.84mm)
On the 25th layer (2.08mm), change the color to jade white and print the remaining part.