Spool cap used on many Ryobi trimmers.

18V Cordless String Trimmers: P20102VNM, P2000, P2001, P2002, P2003, P2004, P2005, P2006, P2200, P2006A
24V Cordless Trimmer/Edger: RY24000, RY24020, RY24021, RY24200
40V Cordless String Trimmer/Edger: RY40001, RY40021, RY40200, RY40201, RY40210, RY40210A

Files:

Ryobi_AC14HCA_Spool_Cap is the original version, should snap onto the trimmer.

I wanted to design my own blades and make the pieces easier to re-print if one breaks.

There are three versions of each hub, numbered 1, 2 or 3. The clips get thicker with each numbered version. If the clips on a #1 hub keep breaking, print a #2 hub, etc.

Print the blades with their flat side down as oriented in the file, cutting edge facing up. They have 30 degree cutting edges to help them hold an edge a little longer.

1 Piece Ryobi Spool Cap with my own blades. More suited for resin printers.

2 Piece Ryobi Spool Cap is so you can print the clips on their side to maximize their strength. More suited for filament printers.

You will need six M3x4mm thread inserts and six M3x15mm socket head cap screws.

Doesn't Matter

Doesn't Matter

0.16

100

ABS