I printed the original stand to see how it would work for my Ultrasabers. I had to shorten the Support to print on the MP Select Mini. After initial print of the extended base, it didn't support the weight so I removed the First Order emblem and Smart Scaled the height to make it deeper. I then added to the back end to provide more support for the weight of the Ultrasabers. While it's not pretty and has some cosmetic issues, it functions as needed so i figured I'd share for other saber owners. I printed the support upside down or from the 'cup' up the 'shaft'.

NOTE: This still won't support an Ultrasaber with a blade attached. Good for hilts only.I can't speak for any other sabers out there.

Much thanks to the original designer jakealbert.

MP Select Mini

No

No

0.3 mm

10%

I had to shorten the Support to print on the MP Select Mini. After initial print of the extended base, it didn't support the weight so I removed the First Order emblem and Smart Scaled the height to make it deeper. I then added to the back end to provide more support for the weight of the Ultrasabers. While it's not pretty and has some cosmetic issues, it functions as needed so i figured I'd share for other saber owners. I printed the support upside down or from the 'cup' up the 'shaft'.