This a non destructive modification to add a bearing to the lower end of the RA on an AVX mount. The larger piece holds a 35x52x12 mm bearing and threads into the housing. The smaller threaded piece screws onto the shaft to provide tension, and the spacer is used on the top end of the shaft. I also cut a piece of the feeler gauge for to shim the inside diameter of the bearing to fit the shaft. This is untested! Use at your own risk! This mod could make your AVX become self aware and harmful!!!

I've also updated it to add tools to allow for tightening and loosening.

FlashForge

Adventurer 3

No

No

200

20% Triangle