Remixed to accommodate a 3D printed pencil holder. Also made new pins that can be printed standing up.

Due to the concave surface on the back of the head and cloak, recommended print settings as follows:

(All items at 0.2-0.25mm layer height)

Cloak and Head:
15% infill
Triangle pattern
Zigzag Support
Use Towers

All other settings:

Hands:
25% infill
Zigzag pattern
Support as needed

Pins:

50% infill
Concentric or cubic pattern
Support not needed
Could use a raft, but I've not had any issues

Pencil Holder:

75% infill (infill is just the base of the cup)
Concentric Pattern
Support not needed

I suggest printing the cloak and head as is, no need to flip, and if you use towers, the sleeves should come out fine.

Color suggestions!

Cup in black
Pins in black
Cloak in brown
Hands and Head in dark green

Paint or don't :)

I'm going to be painting the eyes gloss black, then painting on a thin layer of clear slow cure resin with gold and brown mica along the ears. The cloak will be painted with clear resin with white and gold mica to give a sense of arid desert degradation on his clothes. I'll upload the final product once everything is finished printing :)

Enjoy! Please like and comment!

Note* The works herein are not to be reproduced for retail on any of the selling platforms (ebay, etsy, etc...) I've only made this for my mother in law and for my wife. Not even I'm selling it.

Anycubic

All-metal Mega

Doesn't Matter

Yes

0.25

25%

Painting on resin really helps make the product pop, and last exponentially longer than without. The resin seals the PLA making it impervious to humidity. I suggest Roxy Epoxy available on Amazon. It mixes fast, cures in 8 hours, and paints on perfectly.