The purple filament in my last print wasn’t properly dried, so it didn’t turn out the way it should. I’ll be uploading a new photo soon once I reprint it in different colours. Thanks for checking it out—more coming soon!

Project: Playstation Hue

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
   Light Gray  Transmission Distance: 1.7
   Purple  Transmission Distance: 2.6
   Yellow  Transmission Distance: 6
   Black  Transmission Distance: 0.3
 

This print uses 4 unique filaments

Swap Instructions:
    Start with Light Gray
    At layer #7 (0.64mm) swap to Purple
    At layer #14 (1.2mm) swap to Yellow
    At layer #21 (1.76mm) swap to Black for the rest.

Any colours can be used and layer and 3 colours only as well :) just change the swap layer or delete one