I needed to replace my bedroom door handle quickly, so I designed this handle. It doesn't need any screws or nails, and all the parts fit together to form a handle that holds perfectly. You can add more or fewer spacers (discs) depending on the thickness of the door.

The spindle must be printed solid to ensure sufficient strength. Otherwise, no worries, it works great.

The ‘Axle_v2’ and ‘Axle_v3’ parts are to be used with the female parts only, one on each side. I found that the strength was better, because the junction between the axle and the male part is a little fragile depending on the orientation of the print. The ‘v3’ offers a greater tolerance between the shaft and the female part of the handle, depending on the precision of your printer.