A compact desktop weather station enclosure designed to house temperature, humidity, and barometric pressure sensors with a small OLED display. The enclosure is sized for a clean, desk-friendly footprint and supports USB-C power with space for a backup battery.

This model is part of a complete, buildable hardware project with validated parts, wiring, firmware, and step-by-step assembly instructions.

👉 Full build (parts, wiring, code, and assembly):

https://modo.is/b/weather-station

Description

This is a 3D printable enclosure for a desktop environmental monitoring device featuring:

• Temperature, humidity, and barometric pressure sensing

• Small OLED display for live readings and trends

• USB-C power input

• Internal mounting for MCU, sensor board, and display

• Venting designed for accurate environmental readings

The enclosure is intended for desktop use, with a simple two-part design (front + rear) that assembles using standard hardware.

The full project includes:

• Validated bill of materials (real components)

• Wiring diagram

• Firmware scaffolding

• Assembly instructions

Those resources are maintained on the linked build page.

Printing Notes

• Material: PLA, PETG, or ABS

• Layer height: 0.2mm recommended

• Infill: 15–20%

• Supports: Not required

• Orientation: Print front and rear shells flat

PETG or ABS is recommended if the device will be exposed to warmer environments.