After moving the cup fixings up and down, the producers of this type of hinges did modified the horizontal distance between the holes. So, i decided that the jig needed an update. This version has markings for 45mm and 47mm wide cup fixings (A), the markings for full / half overlay type mounting plates (B) and also the markings for the mounting plates of the inset type hinges (C - those markings were missing from the other version, sorry). The jig is still for 6mm distance from the edge, it will require spacers for smaller distances. For the inset type hinges, the default thickness of the door is 20mm so spacers will be needed for thinner material.

Category: Tools