A Hueforge of a wonderful Goin image of a young girl trying to reanimate a dead dove.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 138.46x200mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.5mm and the Actual Depth is 1.8mm

This print uses 4 unique filaments

Filaments Used:
    PLA PolyTerra Cotton White Transmission Distance: 2.5
    PLA+ Sunlu Skin Transmission Distance: 5
    PLA My Sunlu Meta Grey Transmission Distance: 2.1
    PLA+ My Sunlu Black Transmission Distance: 0.2

Swap Instructions:
    Start with Cotton White
    At layer #10 (0.88mm) swap to Skin
    At layer #16 (1.36mm) swap to Grey
    At layer #18 (1.52mm) swap to Black for the rest.