I was tired of having 2 separate Stream Decks on my desk that were side by side and took up a bunch of room due to the back/stand on the stream deck mini. I made this Stream Deck Mini Attachment that allows the internal electronics of the mini to be tight fit in this base (slight trimming is required to a tight fit) and uses the stock face plate. All you need to do is drill 3 small holes (≈1.5mm diameter) in the bottom of the base on your Regular Stream Deck MK2. Then insert the new mount into those holes and cut the pins (from the printed part) flush with the inside housing of the MK2. Make sure that you feed the USB cable through the printed part, before installing the electronics. This allows the 2 Stream Decks to be mounted together, but then you can simply lift the MK2 up and they separate. This allows the stream decks to be used together, or alone when needed.

The plug is to be inserted AFTER the USB cable has been fed through. Press the plug into the printed part from the INSIDE. If not, the plug will be in the way of the MK2 Stream Deck when they are put together.