This is my first attempt at a hueforge. I chose these colours to match my room but feel free to try other colours.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Purple Transmission Distance: 1
    PLA Ice Blue Transmission Distance: 3.5
    PLA White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Purple
    At layer #18 (1.52mm) swap to Blue
    At layer #22 (1.84mm) swap to White for the rest.