🌌 AROOOOOO🐺

Features a lone wolf beneath a glowing full moon, a bare silhouette tree, and a sky bursting with stars. A straightforward print with a lot of impact.

Designed for A1 mini, if you have a larger printer then you can make it bigger, just ensure you don't adjust the Z axis!

Due to the size and spread of this print, it is more prone to poor adherence so do ensure your print plate is nice and clean (warm soapy water works for me!)

The AMS version will print without intervention, if you don't have AMS, there is a profile with pauses built in where you can change out your filament - full instructions below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. This is pre-set in the file so shouldn't need any changes.

Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue 
PLA BambuLab Basic Cyan 
PLA BambuLab Basic Jade White 
 

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #7 (0.64mm) swap to BambuLab Basic Blue
    At layer #12 (1.04mm) swap to BambuLab Basic Cyan
    At layer #16 (1.36mm) swap to Jade White for the rest.