Important Notice and Disclaimer:
The adapter described here is a preliminary development version The information in this description is based on the current state of development and may be subject to change without prior notice The use of the adapter is solely at the user's own risk The manufacturer assumes no warranty or liability for its functionality, safety, or for damages arising directly or indirectly from its use

Description:
Adapter ring for standard Schrader car valves, suitable for commercial spray cans With this adapter, a spray can can be refilled and re-pressurized

Recommended Application:
For a 600ml spray can, it is recommended to fill it to approximately one third of its volume to allow sufficient space for air pressure This creates only a low operating pressure (Low Pressure) Actual performance depends on: the viscosity of the material used (thin liquids work more reliably), the flow rate of the nozzle used (high-flow caps or viscous paints are often unsuitable)

Advantages:
Cost-efficient: Multiple uses possible, reduces material costs compared to disposable spray cans
Environmentally friendly: Less waste, as spray cans do not need to be constantly disposed of
Flexibility: Mix your own colors, determine your own quantities
Lower pressure risk: With low pressure, the risk of sudden material failure or explosions is lower – the system is more likely to react with leaks before catastrophic failure occurs

Disadvantages / Risks:
Limited performance: Low pressure means lower spray pressure, shorter range, uneven application – especially with viscous paints
Rapid pressure drop: Pressure decreases faster under load
Safety risk: Incorrect pressure, unsuitable materials, or inappropriate caps can lead to leaks or, in extreme cases, dangerous situations
Material compatibility: Thick paints or high-flow caps are problematic – blockages or an uneven spray pattern may occur
Responsibility: Since refilling and pressurizing occur outside standardized manufacturing processes, the risk lies with the user
Maintenance: Valves and adapters must be kept clean and intact Damage or leaks increase the risk