Based on Gridfinity Customizable Container by jrouvier2

The original SCAD file did not allow for customization of the following due to true/false issues with Customizer:

• Label
• Finger slide
• Magnets

I have fixed the SCAD to enable these fields.
1 = True
2 = False

You can now enable and disable these features of the Gridfinity bin.

I hope others find this useful as well.

STLs are provided as examples only. Open the customizer to create your own custom bins.


Original description:

Customizable #gridfinity basic container for Zach Freedman's gridfinity system system

The OpenScad that drives this is a minor modification of vector76'es original, basically just putting it all in one file and making the configuration a bit easier.

These containers differ from Zach Freedman's containers in that:

• Holes for magnets are optional
• The shelf for a label is optional
• The finger slide at the bottom is optional
• Magnet holes end in a cone, reducing issues with sagging over the magnet holes
• Magnet holes are sized to 6.1mm so a 6mm magnet should press-fit into the hole without needing glue (you can tune this in the customizer)