Harley Quinn Lithophane.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Blue Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #7 (0.64mm) swap to Jade White
    At layer #10 (0.88mm) swap to Red
    At layer #14 (1.2mm) swap to Blue for the rest.