Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 92.03x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Smart Recycled Red Transmission Distance: 4.4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Chrominal Deep Sea Blue Transmission Distance: 6
PLA Jessie Premium Yellow Bird Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Deep Sea Blue
At layer #16 (1.36mm) swap to Yellow Bird for the rest.