I have changed the holes for the magnets to be less deep, and at a angle to match the curve in the G923's Paddle Shifters. This allows the magnets to have proper contact with the metal surface.

Adding this magnetic shifter mod does wonders for improving the tactile feel of the paddle shifters on your G923 Logitech wheel. It fits behind the shifters and the magnets hold the paddles back in their native position. When pulling for a shift, you experience much more of a tactile snap.

Creality

Ender 3

No

No

0.1mm Works Best

40%

Supports are not needed, but you might need to drill the 3mm hole for the bolt. Printing with low infill makes them more susceptible to breaking when spreading to fit over the steering boss. I've had good luck with 40%+; less so with 20%. Simply snap it over the steering boss, adjust to your liking, and tighten.

Hardware needed: 4pcs 8x3 magnets, 1pcs M3 x 20mm bolt, 1pcs M3 Nut, Super Glue.