A laptop stand designed to hold a macbook air, but can be upscaled (is roughly 280mm wide by 215 in depth). The "Stand.stl" file must be printed twice, and you need 3 "Peg.stl" files to be printed. It pressure fits together but I recommend downscaling the pegs to 98% scale. The top of the stand in the picture was sanded, primed and painted with acrylics.

Important

• Print the pegs sideways for strength, use a raft if that is easier
• 2x stand 3x peg

Creality

CR-10

Doesn't Matter

No

0.25

30

Print the pegs with a lot more infill and outer layers