Summary

You will need:

• 100mm wide Zobal 18mm shelf holder (e.g. https://phu-gral.eu/systemy-zobal/system-scienny/uchwyt-polki-dwa-kolory-032078 )

I didn't print the zobal holder itself, but made it out of 18mm plywood. You can print the stencil, rough-cut it using jigsaw, glue the stencil using double sided tape and finish it using a router with a pattern tracing bit. The slit for the zobal shelf holder can be easily done using table saw (you can use the table saw calibrator for the initial setting, but make a test cut on some scrap wood first). I glued the zobal holder using epoxy resin.

You may want to glue the mug adapter bottom to the base, but it should just click-in.

Printed with:

• PETG
• nozzle: 0.4 mm
• supports: none (although you may need some if you have problems with the long bridge on the mug adapter base)

Potentially more adapters will come in the future

Zobal lock visible on the photo: https://www.thingiverse.com/thing:7261991